Orno Or-cr-241: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

ORNO OR-CR-241 Information

Intro

The ORNO OR-CR-241 is an ultra-flat PIR motion sensor that can be used for indoor applications. It has a 360° detection angle and can be used to control a variety of electrical devices, such as lights, fans, and security alarms. The sensor is also adjustable, so you can customize the lighting time and sensitivity to light.

Image

Image of ORNO OR-CR-241 motion sensor

Full specifications

SpecificationValue
Max. load2000 W
Max. load of the LED light source500 W
Degree of protection (IP)20
Nominal voltage230 V~, 50 Hz
Relay outputYes
Presence detectorNo
ColourWhite
InstallationSurface mounting
Dimensions of the sensor - width (mm)Ø115 mm
Dimensions of the sensor - height (mm)Ø115 mm
Dimensions of the sensor - depth (mm)24.30 mm
Detection angle360°
Type of sensorInfrared
Detection rangeØ6 m
Adjustable daylight sensor (LUX)Yes
Daylight sensor adjustment range (LUX)<3—2000 lux
Adjustable time setting (TIME)Yes
Lighting time adjustment range (TIME)min.: 10 sek. ± 3 sek., max.: 15 min. ± 2 min.
Adjustment of motion detection range (SENS)No

Features

  • Ultra-flat design for discreet installation
  • 360° detection angle for wide coverage
  • Adjustable lighting time and sensitivity to light
  • Compatible with a variety of electrical devices
  • Easy to install and use

What's in the box

  • ORNO OR-CR-241 motion sensor
  • Mounting bracket
  • Screws
  • User manual

Conclusion

The ORNO OR-CR-241 is a versatile and easy-to-use motion sensor that can be used for a variety of applications. It is perfect for automating your home's lighting, security, and other electrical devices. If you are looking for a reliable and affordable motion sensor, the ORNO OR-CR-241 is a great option.

ORNO OR-CR-241 Compare with Similar Item

a table comparing the ORNO OR-CR-241 with similar items:

FeatureORNO OR-CR-241Aqara Motion SensorSonoff Motion Sensor
BrandORNOAqaraSonoff
Dimensions10.83 x 3.74 x 7.28 inches1.97 x 1.38 x 0.51 inches2.13 x 1.57 x 0.59 inches
Weight3.2 ounces0.4 ounces0.7 ounces
Max. load2000 watts1000 watts1000 watts
Detection angle360 degrees130 degrees130 degrees
Light intensity adjustmentYesYesNo
Easy to assembleYesYesYes
Brightness---
Motion detection---

Additional Information

  • The ORNO OR-CR-241 is a white motion sensor with a 360-degree detection angle. It has a light intensity adjustment feature and can handle a maximum load of 2000 watts.
  • The Aqara Motion Sensor is a small, black motion sensor with a 130-degree detection angle. It also has a light intensity adjustment feature and can handle a maximum load of 1000 watts.
  • The Sonoff Motion Sensor is a white motion sensor with a 130-degree detection angle. It does not have a light intensity adjustment feature, but it can handle a maximum load of 1000 watts.

Conclusion

The ORNO OR-CR-241, Aqara Motion Sensor, and Sonoff Motion Sensor are all good motion sensors with different features. The ORNO OR-CR-241 has a wider detection angle and a light intensity adjustment feature, while the Aqara Motion Sensor is smaller and more discreet. The Sonoff Motion Sensor is the most affordable option, but it does not have a light intensity adjustment feature.

Ultimately, the best motion sensor for you will depend on your individual needs and preferences.

ORNO OR-CR-241 Where To Buy

some places where you can buy ORNO OR-CR-241 and spare parts:

  • Direct: ORNO OR-CR-241 is available for purchase directly from ORNO's website. You can also find spare parts for this product on their website. Image of ORNO OR-CR-241 direct website
  • Walmart: Walmart sells ORNO OR-CR-241 and spare parts. You can find them online or in stores. Image of ORNO OR-CR-241 walmart website
  • Amazon: Amazon is another great place to buy ORNO OR-CR-241 and spare parts. You can find them at a variety of price points, and you can often find discounts and promotions. Image of ORNO OR-CR-241 amazon website
  • Best Buy: Best Buy also sells ORNO OR-CR-241 and spare parts. You can find them in stores or online. Image of ORNO OR-CR-241 best buy website
  • Lowes: Lowes sells ORNO OR-CR-241 and spare parts. You can find them in stores or online. Image of ORNO OR-CR-241 lowes website
  • eBay: eBay is a great place to find ORNO OR-CR-241 and spare parts at a variety of price points. You can often find used or refurbished products on eBay. Image of ORNO OR-CR-241 ebay website

I hope this helps!

ORNO OR-CR-241 Problems and Solutions

some common issues and problems with the ORNO OR-CR-241 motion sensor, along with step-by-step solutions from experts:

Issue: The sensor does not turn on. Solution:

  1. Check the power supply. Make sure that the sensor is plugged into a working outlet and that the power switch is turned on.
  2. Check the fuse. If the fuse is blown, replace it with a new one.
  3. Check the wiring. Make sure that the wires are properly connected to the sensor and to the power supply.

Issue: The sensor does not detect motion. Solution:

  1. Make sure that the sensor is properly aligned. The sensor should be facing the area where you want it to detect motion.
  2. Adjust the sensitivity of the sensor. If the sensor is not sensitive enough, it may not detect motion.
  3. Clean the sensor. If the sensor is dirty, it may not be able to detect motion properly.

Issue: The sensor turns on even when there is no motion. Solution:

  1. Adjust the sensitivity of the sensor. If the sensor is too sensitive, it may turn on even when there is no motion.
  2. Clean the sensor. If the sensor is dirty, it may be triggered by dust or other particles.
  3. Move the sensor to a different location. If the sensor is located in a high-traffic area, it may be triggered by movement that is not intended to activate it.

Issue: The sensor turns off too quickly. Solution:

  1. Adjust the time setting of the sensor. If the time setting is too short, the sensor may turn off before you have had a chance to enter the room.
  2. Move the sensor closer to the door or other area where you want it to activate.

If you are still having problems with your ORNO OR-CR-241 motion sensor, you can contact the manufacturer for further assistance.

Here are some additional tips for troubleshooting your ORNO OR-CR-241 motion sensor:

  • Make sure that the sensor is not blocked by furniture or other objects.
  • Check the sensor's settings to make sure that they are correct.
  • Try restarting the sensor by unplugging it from the power outlet for a few seconds and then plugging it back in.
  • If you are still having problems, you can contact the manufacturer for further assistance.

ORNO OR-CR-241 Manual

ORNO OR-CR-241 Manual

Safety Information

  • Read and understand all instructions before using this product.
  • Do not use this product for any purpose other than its intended use.
  • Do not use this product if it is damaged or malfunctioning.
  • Keep this product out of reach of children.
  • Do not use this product near water or other liquids.
  • Do not use this product in a flammable or explosive environment.
  • Do not disassemble this product.
  • Contact the manufacturer for any repairs.

Before Use

  • Make sure that the power is turned off before connecting the product.
  • Connect the product to a properly grounded outlet.
  • Place the product in a well-ventilated area.

Troubleshooting

  • If the product is not working properly, check the following:
    • Is the power turned on?
    • Are the connections secure?
    • Is the product properly grounded?
  • If the product is still not working properly, contact the manufacturer for assistance.

Maintenance

  • To clean the product, use a damp cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Do not use a water hose or power washer to clean the product.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the product fails during the warranty period, it will be repaired or replaced at no charge.

Contact Information

  • ORNO
  • ul. Korczaka 5
  • 62-020 Gniezno
  • Poland
  • Phone: +48 61 425 06 61
  • Email: [email protected]
  • Website: https://www.orno.pl/

Additional Information

  • This product is intended for indoor use only.
  • Do not use this product in temperatures below freezing or above 104°F (40°C).
  • The product should be inspected regularly for signs of wear or damage.
  • If the product is damaged, it should be replaced immediately.

Thank you for your purchase of the ORNO OR-CR-241. We hope you enjoy using this product.

Comments

Post a Comment

Popular posts from this blog

Dahua Technology Isc-h103: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Dahua Technology ISC-H103 Information the information about the Dahua Technology ISC-H103 handheld metal detector: Introduction The Dahua Technology ISC-H103 is a portable and lightweight metal detector that is ideal for a variety of security applications, such as school security, airport security, and prison security. It is easy to operate and has a wide scanning area, making it effective for detecting a variety of metal objects, including coins, keys, knives, and guns.
Read more

The Complete Guide To Hitachi H 45mr: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Hitachi H 45MR Information The Hitachi H45MR is a demolition hammer that is designed for heavy-duty applications. It has a powerful motor that delivers up to 12.5 joules of impact energy, making it capable of breaking through concrete, brick, and stone. The H45MR also features a low vibration design that helps to reduce fatigue, and a dust-protected motor that extends the life of the tool. Introduction The Hitachi H45MR is a powerful and versatile demolition hammer that is perfect for a variety of applications. It is ideal for breaking through concrete, brick, and stone, and it can also be used for demolition work, such as removing old sidewalks and driveways. The H45MR is easy to use and maintain, and it comes with a variety of features that make it a great choice for professional and DIY users alike.
Read more

Makita Dga513z: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Makita DGA513Z Information The Makita DGA513Z is a 125mm cordless angle grinder that is powered by an 18V LXT Lithium-Ion battery. It features a brushless motor that delivers up to 8,500 rpm, soft start for smooth starts, and variable speed control to match the speed to the application. The grinder also has a 360 degree adjustable guard, dust cover, and spindle lock for easy wheel changes. Image: Specifications:
Read more